Make

Making a Gimbal Handle (Using a Waterjet)

Making a Gimbal Handle (Using a Waterjet)

source

FacebookTwitterGoogle+PinterestShare
View Comments (39)

39 Comments

  1. ChloeTV

    April 20, 2019 at 7:48 pm

    ILTMS is awesome.

  2. Marcus Johnson

    April 20, 2019 at 7:48 pm

    Can u make a 5 axis stabilizer gimbal.. just like the arri trinity gimbal ?? I would live to see someone build this with full dyi Instructions for low cost.

  3. Gene Simonalle

    April 20, 2019 at 7:48 pm

    Great video. Always wondered about diy powder coating. Thanks

  4. Felix Förster

    April 20, 2019 at 7:48 pm

    Tip for tapping a threat: use a little drop of cutting oil on the tap and turn it one turn clockwise then half a turn counterclockwise. Then you'll tap won't break of 🙂

  5. Mæx

    April 20, 2019 at 7:48 pm

    I don't know if i'm right on that… but shouldn't the smaller half of the circle be not threaded? Because only then you can tighten it down real good.

    EDIT: Never mind. I should have watched it all through xD

  6. neel pawar

    April 20, 2019 at 7:48 pm

    Hey Bob, great video. Maybe try using carbon fibre, it would be lighter and stiffer.

  7. ZanGeist

    April 20, 2019 at 7:48 pm

    I didn't see you use any 3 in 1 oil when drilling the Aluminum. Did you and just not show it I'm the video or is Aluminum soft enough it's not necessary?

  8. Kathy Hernandez

    April 20, 2019 at 7:48 pm

    Can you plz make a house tour to see all your upgrades

  9. Ryan Prince

    April 20, 2019 at 7:48 pm

    7500$ machine 1000$ to reserve. Wazer still cool.

  10. GaudyUser

    April 20, 2019 at 7:48 pm

    3:47 the cowbell in the music tho

  11. Shaun Kennedy

    April 20, 2019 at 7:48 pm

    Lol makes it easier to lift a tiny 5 pound camera

  12. William W Powell

    April 20, 2019 at 7:48 pm

    The fact that there exists a prosumer-grade water jet cutter like the Wazer that you can install in your home workshop just kinda blows my mind. It may not be cheap but I'm still stunned that it exists AT ALL

  13. DV Gamer

    April 20, 2019 at 7:48 pm

    I really like you videos. I have a new project for you! Can you make a homemade beyblade stadium?

  14. Nolimited Productions

    April 20, 2019 at 7:48 pm

    Like the handle you should sell it 😉

  15. Prosto Ja

    April 20, 2019 at 7:48 pm

    Bob, thanks for another great video. While grinding aluminium please be aware that aluminium dust is dangerous for lungs, actually more dangerous than steel sparks, so it would be better for you to have some kind of breath protection or at least just keep your head away from where the dust comes, just as you did on the video 🙂

  16. Cam Dunlop

    April 20, 2019 at 7:48 pm

    I understand sponsorships, however making videos with such specialized tools takes the enjoyment out for me.

  17. red thunder

    April 20, 2019 at 7:48 pm

    All wood workers know there is no such thing as scrap wood

  18. NiklasStøterau

    April 20, 2019 at 7:48 pm

    Idea for the quick release: you could use a hinge on one side of the collar and then a clamp on the other side.
    While this would probably require the collar to be thicker and the cut to be directly in the middle of the circle, it would be quicker for sure.

  19. Steve Maguire

    April 20, 2019 at 7:48 pm

    Typically with a collar clamp like that you want the hole the head of the screw sits against to not be threaded and a larger diameter than the screw threads. Tat way the screw just slips through that hole and threads into the second hole. I'm not sure if I'm making that clear…
    HA! i Had paused the video to add the comment. You literally addressed it in the next sentence!

  20. allen sisson

    April 20, 2019 at 7:48 pm

    I am sure this was said, but another thing that could have helped is to not thread the top piece and only tapped into the handle. This would allow the ring to fully compress and not have that micro space that is probably there due to the thickness of the blade… If I am not making sense, think of it like a wood screw, the top portion isn't threaded so it draws the material into the other.

  21. Steve H

    April 20, 2019 at 7:48 pm

    In this vid and others I learned to use CA glue for temporarily holding items together. Great tips!

  22. Marc Vietor

    April 20, 2019 at 7:48 pm

    Hi Bob, i am studying mechanical engineering and we learn that if you use a thread tap that we should use cutting oil and sometimes turn it back to clear the hole! Hope you can use my advise

  23. Abstract FPV

    April 20, 2019 at 7:48 pm

    When tapping turn 3 quarters then back a quater. Turning back unclogs the teeth of the tap and stops it gripping and snapping.

  24. Eleanor Larson

    April 20, 2019 at 7:48 pm

    What kind of lens is that at 13:19?

  25. Vincent Mueller

    April 20, 2019 at 7:48 pm

    You should make a entire cart dedicated to your clamps, like so he can see

  26. Matte Edström

    April 20, 2019 at 7:48 pm

    Not heating hot enough!!!

  27. Matte Edström

    April 20, 2019 at 7:48 pm

    You are doing the tapping wrong! 2 turns in, 1 turn out, to break the material you are cutting!
    That`s why the tap broke^^

  28. Lazarus1940

    April 20, 2019 at 7:48 pm

    My 6 year old loves your channel, so I'm writing this for him. He wants to know if you can make the Piston Cup from Cars, or Tom's pocket knife from Mortal Engines.

  29. SNM CustomWork

    April 20, 2019 at 7:48 pm

    Nice handle, I like it, good job.

  30. Mitchell Roberts

    April 20, 2019 at 7:48 pm

    Such a great video, reminds me of the old Jimmy Diresta knife videos, such quality content as usual Bob, I love your channel and all the content you produce

  31. Justin Case

    April 20, 2019 at 7:48 pm

    what lens is that on the dslr?

  32. Seneko King

    April 20, 2019 at 7:48 pm

    You just can drill this hole and use files to have precise fit 🙂

  33. Figments Made

    April 20, 2019 at 7:48 pm

    Neat project! I love being able to make the things we want instead of having to buy them.

  34. Joe Gray

    April 20, 2019 at 7:48 pm

    So it looks like brazing metal is very similar to sweating copper pipes when doing plumbing work?

  35. Argh Jay Em

    April 20, 2019 at 7:48 pm

    Would’ve been easier if you cut the holes in the handle right after you superglued it together, before shaping it. Just saying. And using some oil/lube when tapping should help, not saying it’s gonna prevent a cheap tap from breaking but certainly makes the whole process a bit smoother.

  36. ThePokemonCelebi

    April 20, 2019 at 7:48 pm

    @chloeTv ILTMS isnt just awesome 😀 its Totaly Ficking epic!!!!! make more stuff bob 😀

  37. Timbo 12'Z

    April 20, 2019 at 7:48 pm

    The 3mm screws won’t hold in aluminium this will break so easily, if used everyday the weight of the expensive ass camera and the torque on these screws no good. The handle needed to be stainless or mild steel im sorry version 2 needed. I give it 4 weeks of everyday use.

  38. Joe Gray

    April 20, 2019 at 7:48 pm

    I like that waterjet machine… and it would be great for knife making… but it's a little out of my price range for now. $7500

  39. britishav8tor75

    April 20, 2019 at 7:48 pm

    That wazzer should be renamed the wowzer cuz of its $7500 price tag!

Leave a Reply

Your email address will not be published. Required fields are marked *

Make

More in Make

1566454887_maxresdefault.jpg

PC Box Fan

HDAugust 22, 2019
1566454368_maxresdefault.jpg

Green jewel scarab beetle in epoxy resin

HDAugust 22, 2019
1566282045_maxresdefault.jpg

DiResta: Log Bird House

HDAugust 20, 2019
1566281464_maxresdefault.jpg

See you in September!

HDAugust 20, 2019
1566109143_maxresdefault.jpg

Ultrasonic Spider Sense

HDAugust 18, 2019
1565936267_maxresdefault.jpg

Wasp: 3D Printed Houses

HDAugust 16, 2019
1565763410_maxresdefault.jpg

Weekend Projects – Sound Card Oscilloscope

HDAugust 14, 2019
1565590574_maxresdefault.jpg

Arduino-Controlled Halloween Props

HDAugust 12, 2019
1565417975_maxresdefault.jpg

How to Make 3 Easy Bathroom Projects // Woodworking

HDAugust 10, 2019